Traffic Engineering with SRv6¶
SRv6 Traffic Engineering (TE) enables operators to steer traffic along explicit paths through the network, optimizing for latency, bandwidth, or other constraints.
How It Works¶
Instead of relying on shortest-path routing alone, SRv6 TE defines SR Policies that specify explicit segment lists (paths) for traffic.
- Ingress PE → P1 (Low Latency Path)
- P1 → P2
- P2 → Egress PE
- Ingress PE → P3 (High BW Path)
- P3 → P4
- P4 → Egress PE
SR Policy Components¶
| Component | Description |
|---|---|
| Headend | The node where the policy is applied |
| Color | Identifies the intent (e.g., low-latency) |
| Endpoint | Destination of the policy |
| Candidate Path | One or more segment lists for the policy |
| Segment List | Ordered list of SIDs defining the path |
Use Cases¶
- Low-latency routing for real-time applications
- Bandwidth reservation for critical flows
- Disjoint paths for redundancy
- WAN optimization across multiple domains
Further Reading¶
- VPN Services
- SR Policy - Deep dive into ODN, PCE, BSID, and color steering
- RFC 9256 - SR Policy Architecture
References¶
- RFC 9256 - Segment Routing Policy Architecture - IETF standard defining SR Policy headend, color, endpoint, candidate paths, and segment lists
- RFC 9252 - BGP Overlay Services Based on SRv6 - BGP signaling procedures for SRv6-based L3VPN, EVPN, and internet services
- Configure SR-TE Policies - Cisco 8000 Series, IOS XR - Cisco IOS XR configuration guide for SR-TE policies on Cisco 8000 series routers